Picotest P9611A precisie labvoeding 0-60V 0-6A 150W
Details
Zeer ruisarme labvoeding die zich met gemak kan meten aan veel duurdere voedingen zoals de Keysight E3632A, maar voor een fractie van de prijs.
Het uitgangsspanningbereik is 0-60V (in stapjes van 1mV) en de stroom is instelbaar van 0-6A (in stapjes van 1mA). Het geheel is gelimiteerd op 150W.
Op het model dat wij uitleveren is USB inbegrepen, ook is dit model voorzien van rubberen stootstrips. Dit zijn bij andere aanbieders opties.
Specificaties
Specifications | |
Output Ratings (@ 0°C ~ 40°C) (P9610A/P9611A) | |
Voltage: | 0 to 36 V / 0 to 60 V³ (P9611A) |
Current: | 0 to 7 A / 0 to 6 A (P9611A) |
Programming Accuracy¹ 1 Year (@ 25°C ±5°C), (% of Output + Offset) | |
Voltage: | 0.05% + 10 mV |
Current: | 0.2% + 10 mA |
Read-Back Accuracy¹ 1 Year (over USB or front panel with respect to actual output (@ 25°C ±5°C), (% of Output + Offset) |
|
Voltage: | 0.05% + 5 mV |
Current: | 0.15% + 5 mA |
Ripple and Noise (with outputs ungrounded, or either output terminal grounded, 20 Hz to 20 MHz | |
Voltage: | < 0.35 mVrms / < 0.5 mVrms (P9611A) < 2 mV p-p / < 3 mV p-p (P9611A) |
Current: | < 2 mArms |
Common Mode Current: | < 1.5 μArms |
Load Regulation ±(% of Output + Offset) | |
Change in output voltage or current for any load change within ratings. | |
Voltage: | < 0.01 % + 2 mV |
Current: | < 0.01 % + 250 μA |
Line Regulation ±(% of Output + Offset) | |
Change in output voltage or current for any load change within ratings. | |
Voltage: | 0.01 % + 2 mV |
Current: | 0.01% + 250μA |
Programming Resolution | |
Voltage: | 1 mV |
Current: | 0.21 mA / 1 mA (P9611A) |
Read-Back Resolution | |
Voltage: | 1 mV |
Current: | 0.1 mA / 0.21 mA (P9611A) |
Meter Resolution | |
Voltage: | 1 mV / 10 mV (P9611A) |
Current: | 0.1 mA / 1 mA (P9611A) |
Transient Response Time | |
Less than 30/50 usec for output recover to within 15 mV following a change in output current from full load to half load or vice versa. | |
Command Processing Time via GPIB | |
Read-Back Commands: Maximum time to read-back output by MEASure? commands | < 20 ms |
Output Programming Range (maximum programmable values) | |
Voltage: | 0 to 37.8 V / 0 to 60 V (P9611A) |
Current: | 0 to 7.35 A / 0 to 6 A (P9611A) |
Temperature Coeffiecient ±(% of Output + Offset) | |
Maximum change in output / read-back per °C after a 30-minute warm-up. | |
Voltage: | 0.01 % + 3 mV / 0.01 % + 10 mV (P9611A) |
Current: | 0.02 % + 3 mA |
Stability (% of Output + Offset) | |
Maximum change in output / read-back per °C after a 30-minute warm-up. | |
Voltage: | 0.02 % + 1 mV / 0.05 % + 10 mV (P9611A) |
Current: | 0.1 % + 1 mA / 0.15 % + 2 mA (P9611A) |
Voltage Programming Speed | |
Maximum time required for output voltage to settle within 1 % of its total excursion (for resistive load). Excludes command processing time. | |
Full Load Up (0V ~ 36V): | < 40 ms / (0V~60V): < 100 ms (P9611A) |
Full Load Down (36V ~ 0V): | < 40 ms / (60V~0V): < 50 ms (P9611A) |
No Load Up (0V ~ 36V): | < 20 ms / (0V~60V): < 35 ms (P9611A) |
No Load Down (36V ~ 0V): | < 400 ms / (60V~0V): < 500 ms (P9611A) |
General Specifications² | |
Item | Limitation & Description |
Power Supply: | 100V ~ 120V (115V Range) 220V ~ 240V (230V Range) |
Power Line (Hz): | 47Hz ~ 63Hz |
Interfaces: | USB & GPIB |
Power Consumption: | 400VA Maximum |
Size & Weight for Rack (WxHxD): | 214.6 x 88.6 x 280 mm, < 2500 g (5.5 Lbs) |
1. The accuracy specifications are gained under 1-hour warm-up condition and the calibration at 25°C.
2. For more information, please check the user's manual.
3. The red supplements are the P9611A's specifications. If there is no red, the specs. are the same as the P9610A's.
The specifications are subject to change without notice due to design improvements.
Vergelijking met de Keysight E3632A
PICOTEST POWER SUPPLY COMPARISON SHEET | |||
Function | Model P9610A | Model P9611A | Model E3632A |
VA Power | 108W | 150W | 120W |
Linear/Switch/Mixed | Mixed | Mixed | Linear |
Single Output | Yes | Yes | Yes |
Autoranging | Yes | Yes | No, two ranges |
Output Voltage & Current |
0 to 36 V 0 to 7 A |
0 to 60 V 0 to 6 A |
0 to 15V/7A 0 to 30V/4A |
Transient Response | < 30 μs | < 50 μs | < 50 μs |
Ripple & Noise Voltage (20Hz to 20MHz) |
< 0.35 mVrms < 2 mVp-p |
< 0.50 mVrms < 3 mVp-p |
< 0.35 mVrms < 2 mVp-p |
Ripple & Noise Current & Common Mode Current |
< 2 mArms < 1.5 uArms |
< 2 mArms < 1.5 uArms |
< 2 mArms < 1.5 uArms |
Master-Slave Control | Yes | No | No |
Remote Sensing | Yes | No | Yes |
Programming Accuracy Voltage & Current |
0.05% + 10 mV 0.2% + 10 mA |
0.05% + 10 mV 0.2% + 10 mA |
0.05% + 10 mV 0.2% + 10 mA |
Read-Back Accuracy Voltage & Current |
0.05% + 5 mV 0.15% + 5 mA |
0.05% + 5 mV 0.15% + 5 mA |
0.05% + 5 mV 0.15% + 5 mA |
Programming Resolution Voltage & Current |
1 mV 0.21 mA |
1 mV 1 mA |
1 mV 0.5 mA |
Read-Back Resolution Voltage & Current |
1 mV 0.1 mA |
1 mV 0.21 mA |
0.5 mV 0.1 mA |
Meter Resolution Voltage & Current |
1 mV 0.1 mA |
10 mV 1 mA |
1 mV 1 mA |
Output Programming Range (Voltage & Current) |
0 to 37.8 V 0 to 7.35 A |
0 to 60 V 0 to 6 A |
0 to 15.45V/7.21A 0 to 30.9V/4.12A |
Stability (Voltage & Current) |
0.02 % + 1 mV 0.1 % + 1mA |
0.05 % + 10 mV 0.15 % + 2 mA |
0.02 % + 1 mV 0.1 % + 1mA |
Short-Withstood Circuit | Yes | Yes | Fair, weaken power |
Sequencing Mode | Yes | Yes | No |
OVP/OCP/OTP | Yes | Yes | No OTP |
Optical Knob | Yes | Yes | No |
No Shorting Bar | Yes | Yes | No |
Front & Rear Bumper | Yes | Optional ($15) | Yes |
USB or USB/GPIB Interfaces | Optional ($25/$95) | Optional ($25/$95) | Yes |
Size & Weight | 21.5*8.9*28 cm, < 2.5 Kgs | 21.5*8.9*28 cm, < 2.5 Kgs | 21.3*13.3*34.8cm, 9.5 Kgs |
Voltage Programming Speed | |||
Full Load Up | (0V~36V) | (0V~60V) | (0V~30V) |
< 40 ms | < 100 ms | 50 ms | |
Full Load Down | (36V~0V) | (60V~0V) | (30V~0V) |
< 40 ms | < 50 ms | 45 ms | |
No Load Up | (0V~36V) | (0V~60V) | (0V~30V) |
< 20 ms | < 35 ms | 20 ms | |
No Load Down | (36V~0V) | (60V~0V) | (30V~0V) |
< 400 ms | < 500 ms | 400 ms |