299 Incl. 21% BTW: € 299,00 Excl. BTW: € 247,11
Voorraadinfo laden
  •  
  • Gratis afhalen in Eindhoven
  • Afhalen bij meer dan 1.000 punten
Artikelnummer: ELE000327

Details

I2C-SPI Control Center has been designed to work with logic analyzer to enable both I2C and SPI signals to be analyzed. GPIO mode and captured data may be filtered to economize and send for trigger condition. This allows the user to trigger only the data they need!

I2C Mode
Function:
Produce and transmit the data of I2C, and simulate the state of the Master or Slave.

Features:
- The Bit Rate of I2C Signal can be set as users' requirements (range from 2KHz to 833KHz).
- Support 10 Bits Address.
- Support transmitting the data of I2C continuously (No Stop) and the Combined Format.
- Support I2C Trigger function, that is to say, the state of the data of I2C can be set as the Trigger Condition according to users' requirements.

I2C Monitor
Function:
Monitor the State of Read/Write, Address and Data Packet on the Protocol Analyzer I2C.

Features:
- Record all packets in the Protocol Analyzer I2C continuously.
- Include the State of Read/Write, the number of the Address and the contents of the Data Packet.
- Save the recorded results by way of the EXCEL File mode.

SPI Mode
Function:
Generate, transmit, simulate and analysis SPI signal (Master/Slave side)

Features:
- The Bit Rate of SPI Signal can be set according to users' requirements ( the range is from 158KHz to 1000KHz).
- Adjust the SPI Mode (Phase/Polarity).
- Support SPI Trigger function, that is to say, the state of the data of SPI can be set as the Trigger Condition according to users' requirements.

GPIO Mode
Function:
Set the state of the 8bits Data according to users' requirements, which is required to be produced.

Features:
- Set the 8 Pin Mode or 6 Pin Mode.
- Match the GPIO Mode with the I2C Mode or SPI Mode to use.
- Adjust the IO Pin to judge whether the Pull-Up Resistance needs to be added.

Batch Mode
Function:
Support the I2C, SPI and GPIO Modes, and deal with the data to be produced in the Batch Mode.

Features:
Define the state of the Data Transmission flexibly and simulate the reaction of the actual device through the Batch Mode.

Accessoires:
# Main unit
# USB cable
# Signal cable set
# Software CD including documentation
# Installation guide

Bekijk voor meer informatie de uitgebreide handleiding (PDF, Engelstalig).
Alles voor de elektronicawerkplaats
  • Deskundige klantenservice
  • Met een 9,6 beoordeeld door klanten